
What Is Engagement Rate? A Simple GA4 Guide
Engagement rate shows what share of your website visits were truly engaged. This guide explains the 3 GA4 rules, the formula, good rates by site type, and how to lift a low rate.

Last updated: November 2026
What is exit rate? It is the share of views of one page that were the last page a visitor saw before leaving your site. If a page gets 1,000 views and 400 of those views ended the visit, the exit rate for that page is 40%.
Exit rate is a page-level number. It does not judge your whole website. It points at single pages and asks a plain question: do people leave after this page, or do they go somewhere else on your site first? Used page by page, it shows you where visitors drop off and where your site keeps them moving.
Exit rate measures the last page of a visit. A visitor can look at five pages and leave from the fifth one. Only that fifth page records an exit. The other four pages record views but no exit. So a page with a high exit rate is a page where visits often end.
Think of your website like a shop with several rooms. Some rooms lead people deeper into the shop. Others have the front door right next to them, so people walk out after looking around. Exit rate tells you which rooms have the front door problem. A high exit rate on a page does not always mean the page is bad. It depends on what the page is for, which we cover below.
Google Analytics 4 (GA4) tracks this with two numbers for each page: pageviews and exits. An exit is counted when a page was the last one viewed in a session. GA4 also has a separate metric called bounce rate, which is often confused with exit rate. They measure different things, and the next sections explain the difference.
The formula is short:
Exit Rate = (Exits / Pageviews) x 100
Take the number of exits from a page, divide it by the total views of that page, and multiply by 100. For example, your pricing page gets 2,000 views in a month, and 900 of those views were the last page of the visit. Divide 900 by 2,000 to get 0.45, then multiply by 100. The exit rate is 45%.
GA4 works this out for you, so you do not need to do the sums by hand. The formula is still worth knowing, because it shows what the number really counts: the share of that page’s views that ended the visit.

This is the part most people mix up. Bounce rate and exit rate sound alike, but they count different things.
In GA4, bounce rate is the share of sessions that were not engaged. A session counts as not engaged when the visitor left in under 10 seconds, saw only one page, and did not trigger a key event such as a form submission or a purchase. Our guide to what bounce rate means and how to lower it explains the three GA4 rules in full.
Exit rate, by contrast, is measured per page, not per session. A visitor can read five pages, spend ten minutes on your site, and still count as an exit on the last page they saw. That visit was a good one, yet it adds one exit to that final page. So a page can have a high exit rate even when every visitor who reaches it is happy.
| Metric | What it measures | Measured at |
|---|---|---|
| Exit rate | The share of a page’s views that ended the visit | Page level |
| Bounce rate | The share of sessions that were not engaged | Session level |
| Engagement rate | The share of sessions that were engaged | Session level |
Engagement rate is the opposite of bounce rate: the two always add up to 100%. Our guide to what engagement rate means in GA4 explains how it is worked out. Exit rate sits apart from both, because it looks at pages one by one instead of whole visits.
You can see exit rate per page in GA4 in a few steps:
If the exit rate column is missing, click the pencil icon at the top right of the report, choose Metrics, add Exit rate, and click Apply. Sort the table by exit rate to see your worst pages first, but sort by views too: a page with 10 views and a 90% exit rate matters far less than a page with 5,000 views and a 60% exit rate.
Use a fair time range. A single day can mislead you on a small site. Look at the last 28 days, or compare one full month with the month before. For the time side of the same story, our guide to what session duration means explains how long people stay before they leave.
There is no single good number, because it depends on what the page is for. A page that ends a visit on purpose should have a high exit rate. A page that should send people deeper into your site should have a low one.
These rough ranges help you judge your own pages:
| Page type | Rough exit rate range |
|---|---|
| Blog posts that answer one question | About 60 to 80% |
| Product or service pages | About 30 to 50% |
| Pricing pages | About 40 to 60% |
| Home page | About 25 to 45% |
| Checkout or thank-you pages | About 80 to 100% |
Treat these as a guide, not a pass or fail test. Your own history matters more. A product page at 55% when it used to be 40% is worth a look. A blog post at 75% is normal: the reader got the answer and left, which is a success, not a failure.

A high exit rate is only a problem when the page is meant to lead somewhere. Some pages are meant to end the visit, and a high exit rate there is a sign the page did its job.
Thank-you and order-confirmation pages. A visitor who reaches your thank-you page has already bought something or sent a form. Leaving from there is natural. An exit rate near 100% is expected.
Contact pages with your phone number. A visitor may read your number, call you, and close the tab. GA4 records an exit, but the visit was a success. Check your calls, not just the rate.
Blog posts that answer one question. A reader who searched for a quick answer, found it in 30 seconds, and left is a happy reader. The page did its job. In GA4 that visit still counts as engaged if it lasted 10 seconds or more, even though the page shows a high exit rate.
Checkout-complete pages. Same as thank-you pages: the sale is done, so leaving is the normal next step.
The pages to worry about are the ones in the middle of the journey: a product page, a pricing page, or a landing page. If people leave from there in large numbers, they never reach the next step.
Start with the pages that get the most traffic and have the highest exit rates. Fix those first, then move down the list.
Every page in the middle of your site should tell the visitor what to do next, and make it easy. A product page should link clearly to the checkout or the quote form. A blog post should link to a related service page or a deeper guide. If the next step is hidden at the bottom or missing altogether, people leave because they cannot see where to go.
A page can be well written and still lose people if it answers the wrong question. If people search for your prices and land on a long article about your company history, they will leave. Check which search terms bring people to each page and whether the page gives them what they searched for. Fix the mismatch first: it often lifts the numbers more than any design change.
Slow pages lose people before they read a word. Compress your images, remove pop-ups and tools you do not need, and test the page on a phone. A page that loads in under three seconds keeps far more people than one that takes six.
More than half of most small business traffic comes from phones. A page that looks fine on a laptop can be hard to use on a small screen: tiny text, buttons that are hard to tap, or a form that needs sideways scrolling. Open your worst pages on your own phone and use them as a customer would.
A page full of dead links or a form that throws an error will push people out. Click through your top pages once a month. Fix anything broken before you rewrite anything.
Exit rate is the percentage of views of one page that were the last page of the visit. It is worked out as exits divided by pageviews, times 100. It is a page-level metric, so each page on your site has its own exit rate.
Divide the number of exits from a page by the total views of that page, then multiply by 100. For example, 400 exits from 1,000 views gives an exit rate of 40%. GA4 works this out for you in the Pages and screens report.
Bounce rate is measured per session: it is the share of visits that were not engaged in GA4. Exit rate is measured per page: it is the share of a page’s views that ended the visit. A visitor can have a long, useful visit and still count as an exit on the last page they saw.
It depends on the page. Blog posts often sit at 60 to 80%, product pages at 30 to 50%, and thank-you pages near 100%. Judge a page by its job: a page that should lead somewhere needs a lower rate than a page that ends the visit on purpose.
No. A high exit rate is fine on thank-you pages, order-confirmation pages, and blog posts that answer one question. It is a problem on product, pricing, and landing pages, where people should move to the next step instead of leaving.
Go to Reports, then Engagement, then Pages and screens. The Exits and Exit rate columns show the numbers per page. If the columns are missing, click the pencil icon at the top right of the report and add them under Metrics.
Exit rate is a simple number with a simple message: where do visits end? Check it page by page in GA4, ignore the high rates on pages that are meant to end the visit, and fix the pages in the middle of the journey first. A clear next step, a fast page, and content that matches the search will move the number more than any trick.

Engagement rate shows what share of your website visits were truly engaged. This guide explains the 3 GA4 rules, the formula, good rates by site type, and how to lift a low rate.

Learn how to add Google Analytics to WordPress in minutes — with a free plugin, Google Tag Manager, or code. No coding skills needed.

Session duration is the time between the first and last thing a visitor does in one visit. Here is how it works, why it can read zero, and what a good number looks like.