How to Reduce the Risk of Falling on A Job Site

Not every job site is without risk; there are others that are with enormous risk. But even with the risk, there are ways you can reduce it to a certain level. You only need to find the right ways of reducing the risk if you are to be successful in the venture. If you are trying to find ways to reduce the risk of falling on a site, there are ways that you can do it. 

Hazard Assessment

The first thing you want to do to reduce the risk of falling is to conduct a hazard assessment of your job site. Identify potential fall hazards, and determine how you will eliminate, reduce or control those hazards. Determine the type of fall protection system that will be used on your job site. There are three types to choose from. Personal Fall Arrest Systems (PFAS) using an anchor point. PFAS uses a travel restraint system and installs guardrails. 

Fall Protection Systems

One of the most difficult areas of safety is to address falls protection. There are numerous fall protection applications such as guardrails, temporary or scaffold lifelines, and tie-off points, but one option that works in many situations is a self-retracting lifeline. The lines can be mounted almost anywhere, including on a building exterior or at the edge of an opening, and they will allow you to tie off at a safe distance from an edge. This can also be done on a horizontal or overhead application where you cannot install guardrails because of obstructions such as equipment that is being worked on or other obstructions.

Employee Training and Safety Programs

Before any work begins, it is necessary to ensure that all employees are well-trained in proper workplace safety precautions. Every employee should have a heights safety certification from Construction Training Group, and be familiar with their individual responsibilities and potential hazards. Construction Training Group can help you in the training aspect. Training should be documented, so if an accident occurs on site, the company or contractor may prove that reasonable safety measures have been taken. No liability will fall back on them as a result. Training programs should be updated continuously as new equipment makes its way into use on the job site. 

Dust Control

The first line of defense against dust is to keep it from spreading in the first place. Don’t sweep it up, as that just sends it into the air. Instead, try vacuuming or wet sweeping. If you need to use a broom, wet the bristles before sweeping to prevent dust from rising. You can also control dust at the source by using tools that collect or suppress dust as they work. When you’re using these tools, it’s a good idea to wear a respirator, so you don’t breathe in too much of the dust in the air—but don’t forget that your clothes will be absorbing some of this dust. 

Falling Is A Huge Concern On Construction Sites

Falling on a job site is quite a huge concern among plenty of contractors and construction heads. The good thing is that there are ways you can prevent it from happening. With the above ideas, and you can use a combination of all, you can easily ensure you reduce the risk of falling on your job site.